安平华耀潮汐苗床厂——金秋银活动十已开启

安平华耀潮汐苗床厂——金秋银活动十已开启

运用潮汐式灌溉需注意以下几点：在有可吸收紫外线掩盖资料的温室内运用；勿将搁置的底盘长时间暴露在阳光下；仅用于作物或相似出产；防止运用追赶正常量的肥料和化学药液；承重为70千克/平方米；请在低于60℃的环境下运用。
苗床的技能参数
丝径通常选用3mm,4mm,3/4mm等，格外丝号可根据客户请求定制。
常见的网孔是2x13cm，3x13cm，2.5x13cm，2x12cm等。承重性好。
苗床的外表处理通常是热镀锌，它具有镀锌层后、漂亮、耐酸碱、抗老化、抗腐蚀性强，寿命长等优点。


      潮汐苗床适用于盆栽植物的营养液栽培和容器育苗的工厂化生产，具有节水、节肥、生产效率高、作物长势好等特点，应用表明，采用潮汐灌溉式的作物，其生长量明显优于人工浇灌方式，可减少用水量33%，提高水分利用效率40%，还可减少氮肥使用量。潮汐式灌溉可推动我国设施农业的增产、增收。提高花卉、种苗的品质，具有广阔的应用前景。


       潮汐式灌溉移动苗床栽培床是一种床面为塑料结构的栽培床，其床面采用塑料制作的潮汐式苗盘，它又称底部灌溉式栽培床。这种潮汐式灌溉移动苗床采用基本与商品化金属结构栽培床相同的立柱、支撑，床面采用模压成型的不透水塑料苗盘。灌溉时，苗盘内注满清水或营养液，并使其滞留一定的时间，以使作物依靠毛细作用通过花盆底部的排水孔吸收水分。之后灌溉水排出栽培床，或收集再利用，或直接排到当地的下水管道。


Anping Huayao tidal seedbed factory

         The following points should be paid attention to when using tidal irrigation: use in the greenhouse with UV absorption masking data; do not expose the shelved chassis to the sun for a long time; only use for crops or similar production; prevent the use of fertilizers and chemical solutions exceeding the normal amount; load bearing capacity is 70 kg / m2; please use it under the environment below 60 ℃.

Skill parameters of seedbed

The wire diameter is usually 3 mm, 4 mm, 3 / 4 mm, etc. the extra wire size can be customized according to the customer's request.

The most common mesh is 2x13cm, 3x13cm, 2.5x13cm, 2x12cm, etc. Good bearing capacity.

The appearance of the seedbed is usually galvanized. It has the advantages of galvanizing layer, beautiful, acid and alkali resistance, anti-aging, corrosion resistance, long life and so on.

         Tidal seedbed is suitable for potted plant nutrient solution cultivation and container seedling factory production. It has the characteristics of water saving, fertilizer saving, high production efficiency and good crop growth. The application shows that the growth of crops with tidal irrigation is obviously better than that of artificial irrigation, which can reduce water consumption by 33%, improve water use efficiency by 40%, and reduce nitrogen fertilizer use. Tidal irrigation can promote the increase of production and income of facility agriculture in China. It has a broad application prospect to improve the quality of flowers and seedlings.


         Tidal irrigation moving seedbed cultivation bed is a kind of cultivation bed with plastic structure. Its bed surface adopts tidal seedling tray made of plastic, which is also called bottom irrigation cultivation bed. This kind of tidal irrigation moving seedbed adopts the same column and support as the commercial metal structure cultivation bed, and the bed surface is made of moulded impermeable plastic seedling tray. When irrigating, the seedling tray is filled with clear water or nutrient solution and retained for a certain period of time, so that the crop can absorb water through the drainage hole at the bottom of the flowerpot by capillary action. After that, the irrigation water is discharged from the cultivation bed, or collected and reused, or directly discharged to the local sewer.