林甸县华耀农业苗床网片常用尺寸

林甸县华耀农业苗床网片常用尺寸

大棚移动苗床-热镀锌移动苗床的规格：
苗床设计宽度1.4m,长度38m,高度0.75m,每跨设4组,总计24组
苗床立柱、横梁采用40×30×1.5mm的矩形管,床面四周采用铝合金边沿,网片所有材料都采用热镀锌处理。
材质:优质低碳钢丝
丝径：4.0mm /3.0mm
网孔：120 mm×25mm 130mm×30mm 50mm×50mm
尺寸：1.9m×4m


花卉移动苗床特点：
  设计，使用方便，温室利用率高达百分之八十
  1、手动驱动，操作简单，移动方便。苗床边框为铝合金材质，支架部分的钢管和苗床网都采用热镀锌工艺，能在潮湿环境下长期使用。
  2、可向左、右移动300mm，能使温室的使用面积达80%左右。
  3、设有限位防翻装置，防止由于偏重引起的倾斜问题。

苗床网片-镀锌苗床网片的焊接工艺：
新苗床网片采用进的式反向焊接工艺,网面焊接更牢固,焊头在经线上逐个单点焊接,用工时虽多,但质量较好。

Common size of net of Huayao agricultural seedbed in Lindian County

Specification of moving seedbed in greenhouse - hot dip galvanizing moving seedbed:

The design width of the seedbed is 1.4m, the length is 38m and the height is 0.75m. There are 4 groups in each span, with a total of 24 groups

The column and crossbeam of seedbed are made of 40 × 30 × 1.5mm rectangular tubes. The edge of aluminum alloy is used around the bed surface. All materials of mesh are hot-dip galvanized.

Material: high quality low carbon steel wire

Wire diameter: 4.0 mm / 3.0 mm

Mesh: 120 mm × 25 mm 130 mm × 30 mm 50 mm × 50 mm

Size: 1.9m × 4m

Characteristics of flower moving seedbed:

Advanced design, easy to use, greenhouse utilization rate as high as 80%

1. Manual drive, easy to operate and easy to move. The frame of the seedbed is made of aluminum alloy. The steel pipe of the bracket and the seedbed net are all hot-dip galvanized, which can be used for a long time in humid environment.

2. It can move 300 mm to the left and right, which can make the use area of greenhouse reach about 80%.

3. It is equipped with limit and anti overturning device to prevent tilting caused by excessive weight.

Welding process of seedbed mesh - galvanized seedbed mesh:

The new seedbed mesh adopts the progressive reverse welding process, the mesh surface is welded more firmly, and the welding head is welded one by one on the warp line. Although the working hours are large, the quality is good.