深泽县YD-008移动苗床安装流程

深泽县YD-008移动苗床安装流程

       苗圃土壤和育苗设备的消也是有效的措施。目前市场上的各种消都应该针对经济有效的种类停止精心挑选，边框厂家育苗盘：无论是平面栽培还是平面栽培，都需求用育苗盘作为豌豆的无土栽培。如今运用的大多数幼苗都是带孔的平底塑料板。这种苗板美观，笨重，易挪动。盘子重约500克，盘子的外度为60厘米，宽度为24厘米，深度为6厘米。浇水设备：自动浇水，可装置微型洒水安装和定时器，喷灌。为了降低本钱，普通采用人工灌溉。像蚊帐，温室蚊帐，镀锌蚊帐，花网格，温室，幼苗净等，大尺寸：1.9mx4m（依据人工科学的准绳，人们通常把床宽1.7米，因而，蚊帐尺寸普通宽约1.7米，长度我们普通倡议控制在2.5米，次装置好，*二次加载卸载时间不容易损。

       移动苗床可以放在温室大棚中用来养花育苗、种植蔬菜。热镀锌丝焊接：有点美观、价格便宜，缺点焊接部位 有工作点的容易生锈； 第二、整体焊接厚热镀锌：锌层比较厚一般在60-80微米左 右，一般的温室条件下使用20年不会生锈，效果较为理想； 但是造价相比要高一些。缺点就是厚热镀锌厚花卉苗床网表面不 光滑有锌毛。 第三、电镀锌 静电喷塑：外表美观、双层防腐、价格适中 ； 第四、热浸塑：外观*漂亮、抗腐蚀性强、特别适合于温 室湿热的环境。 第五、不锈钢光亮丝：焊接而成，**生锈，成本较高。

联栋温室移动苗床-大棚**移动式苗床的规格：
移动苗床的标准宽度1.7m，标准长度4m，标准高度0.7m。高度上可以微调整，宽度和长度可以根据大棚的实际尺寸量身定制。
材质：选用优质低碳钢丝
丝径：4.0mm /3.0mm
网孔：120 mm×25mm 130mm×30mm 50mm×50mm
尺寸：1.9m×4m
加密网格结构(20mm×120mm),网面美观,强度更大。

Installation process of yd-008 mobile seedbed in Shenze County

           The elimination of nursery soil and seedling equipment is also an effective measure. At present, all kinds of consumption in the market should be carefully selected for the economic and effective species. The seedling tray of border manufacturers: no matter it is flat cultivation or plane cultivation, it needs to use seedling tray as soilless cultivation of pea. Most of the seedlings used today are flat bottomed plastic plates with holes. This kind of seedling board is beautiful, bulky and easy to move. The plate weighs about 500 grams, with an external dimension of 60 cm, a width of 24 cm and a depth of 6 cm. Watering equipment: automatic watering, micro sprinkler installation and timer can be installed. In order to reduce the cost, the general use of artificial irrigation. Such as mosquito net, greenhouse mosquito net, galvanized mosquito net, flower grid, greenhouse, seedling net, etc., large size: 1.9mx4m (according to the artificial science criterion, people usually make the bed width 1.7m, therefore, the bed net size is generally about 1.7m, and the length is generally controlled at 2.5m. The secondary installation is good, and the second loading and unloading time is not easy to damage.

            The mobile seedbed can be placed in the greenhouse for raising flowers, seedlings and vegetables. Hot dip galvanized wire welding: it is a little beautiful and cheap, but the welding parts with working points are easy to rust; second, the overall welding thickness is hot-dip galvanized: the zinc layer is relatively thick, generally about 60-80 μ m, and it will not rust under the general greenhouse conditions for 20 years, and the effect is ideal; but the cost is higher. The disadvantage is that the surface of thick hot-dip galvanized flower seedbed net is not smooth and has zinc hair. Third, electro galvanized electrostatic spraying: beautiful appearance, double-layer anti-corrosion, moderate price; fourth, hot-dip plastic: beautiful appearance, strong corrosion resistance, especially suitable for hot and humid greenhouse environment. Fifth, stainless steel bright wire: welded, never rust, high cost.



Specification of mobile seedbed for greenhouse - special mobile seedbed for greenhouse:

The standard width of moving seedbed is 1.7m, the standard length is 4m and the standard height is 0.7m. Height can be slightly adjusted, width and length can be customized according to the actual size of the greenhouse.

Material: select high quality low carbon steel wire

Wire diameter: 4.0 mm / 3.0 mm

Mesh: 120 mm × 25 mm 130 mm × 30 mm 50 mm × 50 mm

Size: 1.9m × 4m

Dense grid structure (20 mm × 120 mm), beautiful mesh surface, stronger strength.